Portal:SciTech - Revision history

Admin: /* Perl Modules and Environments */

2025-03-10T05:55:03Z

Perl Modules and Environments

← Older revision		Revision as of 01:55, 10 March 2025
Line 17:		Line 17:
	* Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)		* Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)
	* Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment:		* Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment:
			<blockquote><code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code>
	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code>

	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\x86_64-w64-mingw32\bin</code>		<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\x86_64-w64-mingw32\bin</code>
Line 24:		Line 23:
	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\bin</code>		<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\bin</code>

	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>		<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code></blockquote>

	* Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command		* Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command
	* These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)		* These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)

Admin: /* Perl Data Language */

2025-03-10T05:53:36Z

Perl Data Language

← Older revision		Revision as of 01:53, 10 March 2025
Line 15:		Line 15:
	The distribution comes as a .ZIP file, not an installer like the standard Strawberry Perl, so there are some post "unzip" steps that are worth following.		The distribution comes as a .ZIP file, not an installer like the standard Strawberry Perl, so there are some post "unzip" steps that are worth following.

	# Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)		* Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)
	# Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment:		* Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment:

	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code>		<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code>
Line 26:		Line 26:
	<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>		<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>

	# Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command		* Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command
	# These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)		* These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)

	=== SPVM - The SPVM Language ===		=== SPVM - The SPVM Language ===

Admin: /* Introduction */

2025-03-10T05:52:46Z

Introduction

← Older revision		Revision as of 01:52, 10 March 2025
Line 16:		Line 16:

	# Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)		# Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)
	# Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment: <code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code> <code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\x86_64-w64-mingw32\bin</code><code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\bin</code><code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>		# Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment:

			<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code>

			<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\x86_64-w64-mingw32\bin</code>

			<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\bin</code>

			<code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>

	# Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command		# Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command
	# These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)		# These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)

Admin at 05:51, 10 March 2025

2025-03-10T05:51:11Z

← Older revision		Revision as of 01:51, 10 March 2025
Line 1:		Line 1:
	== Introduction ==		== Introduction ==
	This page outlines various science related environments and libraries that are available to Perl programmers. It is by no means exhaustive. In addition to this page, there are are the portals for [[Portal:Perl+OpenMP\|Perl+OpenMP]] and the one for [[Portal:Concurrency\|Concurrency]] in Perl.		This page outlines various science related environments and libraries that are available to Perl programmers. It is by no means exhaustive. In addition to this page, there are are the portals for [[Portal:Perl+OpenMP\|Perl+OpenMP]] and the one for [[Portal:Concurrency\|Concurrency]] in Perl.

			== Perl Modules and Environments ==

			=== Perl Data Language ===
			The Perl Data Language is an excellent environment for doing science with Perl. Some rightly say it is the best such environment for doing science in ''any'' language.

			* [https://pdl.perl.org Visit PDL's main site]
			* Strawberry Perl .ZIP with PDL (64bit 5.40.1) [[https://github.com/StrawberryPerl/Perl-Dist-Strawberry/releases/download/SP_54001_64bit_UCRT/strawberry-perl-5.40.0.1-64bit-PDL.zip download .ZIP]][[https://strawberryperl.com/releases.html see all releases]]
			* Via their main site, you will also find information for an active email list and IRC channel
			* Many contributions to the [https://science.perl.org Science Perl Journal] have used PDL

			==== Notes Regarding Setting up Strawberry Perl's PDL .ZIP File ====
			The distribution comes as a .ZIP file, not an installer like the standard Strawberry Perl, so there are some post "unzip" steps that are worth following.

			# Unzip in the default directory, but in C:\ (this is similar to where the standard Strawberry Perl installer defaults)
			# Assuming the version 5.40.0.1, the following directory paths should be added to the Windows "Path" environment: <code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\bin</code> <code>C:\strawberry-perl-5.40.0.1-64bit-PDL\c\x86_64-w64-mingw32\bin</code><code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\bin</code><code>C:\strawberry-perl-5.40.0.1-64bit-PDL\perl\site\bin</code>
			# Once the above paths are set, you may open up and CMD or Powershell window and start the PDL REPL using the "pdl2" command
			# These paths also allow for [[Developing and Distributing wxPerl Applications on Windows\|wxPerl]] development workflow to be used as it would with normal Strawberry Perl, except you may use PDL related things in your GUIs (which is super cool!)

			=== SPVM - The SPVM Language ===
			SPVM is a statically typed programming language that has Perl-like syntax. Read more [https://metacpan.org/pod/SPVM here].

			* [https://metacpan.org/pod/SPVM SPVM's CPAN site]
			* [https://github.com/yuki-kimoto/SPVM/wiki SPVM Wiki]
			* [https://github.com/yuki-kimoto/SPVM SPVM Github Repo]

Admin: Created page with "== Introduction == This page outlines various science related environments and libraries that are available to Perl programmers. It is by no means exhaustive. In addition to this page, there are are the portals for Perl+OpenMP and the one for Concurrency in Perl."

2025-03-10T05:30:25Z

Created page with "== Introduction == This page outlines various science related environments and libraries that are available to Perl programmers. It is by no means exhaustive. In addition to this page, there are are the portals for Perl+OpenMP and the one for Concurrency in Perl."

New page

== Introduction ==
This page outlines various science related environments and libraries that are available to Perl programmers. It is by no means exhaustive. In addition to this page, there are are the portals for [[Portal:Perl+OpenMP|Perl+OpenMP]] and the one for [[Portal:Concurrency|Concurrency]] in Perl.